- Client
- Private client
- Source
- Reference photos and the maker's label artwork
- Made for
- Rendering
- Services
- 3D product modeling
The brief
A 3D model of a 12 V cordless drill/driver for product imagery: the body, chuck, speed and torque rings, battery pack and the printed labels, true to the real tool.
What we did
The main forms were blocked out first, then the hard-surface detail: the chuck grooves, vents, trigger, grip panels and battery latch, modeled with clean edge flow so edges catch the light. The model was split into two material sets and UV'd so the labels and the torque numbers stay sharp. The textures are 2K PBR (base colour, roughness, metallic, normal and height), with the yellow plastic, rubber grip and metal bit as separate finishes.
Process
From the first idea to the final file

Stage 01
Model
Hard-surface forms, no materials yet
The body, chuck, grip and battery modeled as hard surfaces, with chamfered edges and the vents, trigger and latch cut in. Checked in clay, where only the forms show.

Stage 02
Topology
Clean edge flow, ready for UVs
The wireframe shows the topology: dense where the curves and grooves need it, light on the flat panels, and laid out so the UVs keep the labels and numbers sharp.

Stage 03
Final
PBR materials and the maker's labels
Two 2K PBR material sets: yellow and black plastic, a rubber grip, the metal bit and the printed labels and torque markings.
Before and after



| Metric | Before | After |
|---|---|---|
| Triangles | n/a | 28,655 |
| Material sets | n/a | 2 (2K PBR) |
