Product & hard-surface · 3D product modeling
3D product modeling for renders, online stores and AR
Your product modeled from photos, drawings or CAD to its real dimensions, with clean hard-surface topology, UVs and PBR materials, ready for renders, web viewers and AR.


- Subjects
- Products · Tools · Hard-surface props
- Built from
- Photos · Drawings · CAD
- First reply
- within 12 hours
The problem
A product model has to pass for the real thing.
Buyers know the product in their hand, so a 3D version is judged against it: a chamfer that is too soft, a logo that sits a millimetre off, plastic that looks like painted metal. A product model also has to work in more than one place. The same drill might appear in a studio render, a store page that loads on a phone, and an AR view on a kitchen table, and each one has its own limits on size and materials.
Sound familiar?
- Photos and drawings, but no 3D file to build from
- A CAD file that is far too heavy for the web or a renderer
- Proportions or details that look slightly wrong next to the real product
- Logos and labels that blur, stretch or float off the surface
- Materials that read as plastic when they should be metal, or the reverse
- A model that looks good in renders but won't load in a web viewer or AR
Why it happens
From references to real size
A product model starts with measurements, not with a sphere. We block out the main forms at the product’s real size from your drawings, CAD or measured photos, and line them up against photos from the front, the side and the top. Only when the silhouette and proportions match do we start on the detail. A grip a few millimetres too thick is easy to fix in a blockout and expensive to fix once the vents, seams and labels are in.
Hard surfaces that catch the light
Manufactured objects are read through their edges. A real moulded part never has a perfectly sharp corner; it has a small chamfer or fillet that picks up a line of light. We model those edges with clean edge flow, so the product reads as moulded plastic, cast metal or rubber, and not as a soft or blocky copy of it.
One product, several places
A store page, an AR view and a close-up render each need something different. The web and AR version stays light so it loads on a phone; the render version can carry more detail. We build from the same model so both match, and we check each export in the place it will be used: the renderer, your store’s viewer, or an AR preview on a phone.
What we fix
The work, part by part
- 01
Measured blockout
The main forms built to the real dimensions first, from your drawings, measurements or CAD, and checked against your photos before any detail goes in.
- 02
Hard-surface detail
Chamfers, seams, vents, grips and buttons modeled with clean edge flow, so edges catch the light like the real part.
- 03
Topology for its use
Light and clean for web and AR, or denser with subdivision support for close-up renders. One build, sized for where it goes.
- 04
UVs and texture layout
UVs laid out so labels, logos and printed text stay sharp where the camera looks.
- 05
PBR materials
Plastics, rubber, metal and glass with base colour, roughness, metallic and normal maps, matched to the real finishes.
- 06
Labels and decals
Your logos, spec plates and printed markings placed and sized from your artwork.
- 07
Variants
Colourways and swappable parts set up as separate materials or meshes, ready for a configurator.
- 08
Export and checks
Exported for your renderer, store or AR viewer and checked in it: scale, pivot, file size and materials.
What you get
Files you can import today
- The model as GLB, FBX or OBJ, plus USDZ for Apple AR on request
- A PBR texture set: base colour, roughness, metallic and normal maps
- A lighter web or AR version alongside the render version, if you need both
- Colour or material variants, if requested
- Clay, wireframe and textured stills of the final model
Limits
When we’ll tell you no
We would rather turn a job down in the free review than deliver something that doesn’t work for you.
- We model the product's look, not its engineering. The model is not a manufacturing file and is not checked for tolerances or fit.
- Accuracy depends on what you send. With exact drawings or CAD we match dimensions closely; from photos alone, small details are judged by eye.
- Logos and markings are placed from the artwork you supply. You need the rights to any brand you ask us to show.
- How a model looks in your store or AR viewer also depends on that viewer's lighting and file limits. We test it where we can, but we don't control your platform.
Your quote
What affects the price
No two jobs are the same, so we don’t publish prices. After a free review of your brief you get a fixed quote and a delivery date. You pay 50% upfront, refundable until work starts. How we quote →
- How much surface detail the product has: vents, grips, threads, buttons
- What you can send: CAD, drawings with dimensions, or photos only
- The number of materials, labels and decals
- Whether you need a render version, a web or AR version, or both
- Colour or part variants
- How many products, and your deadline
Workflow
From upload to tested delivery
The quote gives a fixed delivery date before any work starts.
- 01
Send your brief
Photos from every side, drawings or CAD, the real dimensions, and where the model will be used.
- 02
Free review and fixed quote
We check the references, ask for anything missing, and reply with a fixed price and a delivery date.
- 03
Blockout to scale
The main forms at real size, shared with you before detail goes in.
- 04
Detail, UVs and materials
Hard-surface detail, UVs, PBR materials and your labels, with clay and textured screenshots along the way.
- 05
Export and delivery
Exported for your renderer, store or AR viewer, checked there, then delivered with stills.
Led by Azmal Hossain Razib, Partner & Lead Character Artist
Evidence
Related work
FAQ
Questions about this service
Can you work from our CAD files?
Yes. CAD gives us exact dimensions, so it's the best starting point. CAD models are usually far too heavy and messy for renders, the web or AR, so we use them as a guide and build a clean model on top, with proper topology, UVs and materials.
We only have photos. Is that enough?
Often, yes. Send photos from every side, close-ups of the details and labels, and at least one real measurement, such as the overall length. From photos alone, small details are judged by eye, so we share the blockout early for you to check against the real product.
Will the model load fast on our store or in AR?
That's what the web version is for. We keep its geometry and textures within the limits of your platform, typically a few megabytes for a GLB, and check it in a web viewer before delivery. If you also need close-up renders, you get a more detailed render version as well.
Can you add our logo, labels and printed text?
Yes. Send the artwork as vector files or high-resolution images, and we'll place it on the model at the right size, so it stays sharp. You need to own the brand or have the rights to show it.
Can we get several colours or versions of the product?
Yes. Colourways can be separate material sets on one model, and swappable parts can be separate meshes, ready for a configurator or for rendering each version. List the variants in the quote form so they're in the price.
Can we use the model to manufacture the product?
No. We model how the product looks, not how it's engineered. The model isn't checked for tolerances, wall thickness or fit between parts, so it isn't a manufacturing file. For production, use your engineering CAD.
How do you protect my files and intellectual property?
Your files stay confidential, and we can sign an NDA on request. We only show your project in our portfolio if you opt in. Source files are deleted 90 days after delivery.
Get a quote
Tell us about your project.
A few short questions, your files or reference links, and a budget range. We reply within 12 hours.
Get a quoteThe quote form will ask
- How many products?1 · 2–5 · 6 or more
- Where will the model be used?Renders or marketing images · Online store or web viewer · AR · Product configurator · Game or real-time scene
- What can you send us?CAD files · Drawings with dimensions · Photos · The physical product
- Do you need colour or part variants?No · A few colourways · Swappable parts
- File format or platform
Questions without “required” are optional. “Not sure” is a fine answer.
NDA on request. Your files are confidential and deleted 90 days after delivery.
Last updated:



